Firestone Technical Resources, Inc
Providing personal service for your impersonal technology.
Upgrading to Intuit's QuickBooks Enterprise 2013 seemed to be an easy task at first, even though the step by step documentation was next to impossible to find on Intuit's web site. However, it took several hours to track down what seemed to be a simple issue, getting the multi-user mode working again.
Here are some steps to follow for upgrading QuickBooks Enterprise 2013:
For some reason business owners have come to believe that relocating their telephone lines and Internet service can be done quickly and easily. Some of this misunderstanding and failed expectation may come from the ease of moving a cell phone number from one carrier to another. This is not the case for land line phone numbers or Internet service.
Telephone Service
After completing several updates on Exchange 2013 due to another issue, we found that e-mail messages were going to the Drafts folder instead of the Sent Items folder. In addition the server was not receiving any messages either.
After further investigation we found that the Mail Transport service was failing, not immediately, which was why we didn't notice it after it was started. In this particular case the client had a secondary SMTP port configured for relay messages but that port was setup on both the Exchange 2013 CAS and Database servers but only one of the CAS server actually had the IP address assigned on the NIC. Once the relay SMTP port configuration was removed from the Database server the Mail Transport service ran fine and mail flowed through the system correctly.
Microsoft has recently released several news and technotes regarding a vulnerability recently discovered in Internet Explorer versions 6 through 11. This vulnerability could allow a hacker to compromise a computer that is browsing a web site that has been selectively changed to take advantage of this vulnerability.
News sources have reported that Internet Explorer should not be used and the US Department of Home Land Security is also warning computer users of this issue.
While fixing a client computer I kept having an issue trying to update their Malwarebytes application. Each time the update would attempt to run it would just hang. The system was fairly clean with the exception of one malware application, Babylon Toolbar. The system was also installed with Norton Antivirus, which has not been an issue in the past.
After several attempts to get the update...
One of our clients was using Microsoft Office 2010 on a trial basis but it had expired and therefore purchased a license of Office 2013 Home and Business from Microsoft's online store. After installing the software they attempted to run Outlook 2013 which would start and then display an error "Microsoft Outlook has stopped working". We noticed that all of the Microsoft applications provided the similar error messages.
Our first attempt was to run a repair on the Microsoft Office installation from the Programs and Features control panel. That made no difference. We then attempted reinstalling the software and still had the same issue. We the found a technical note indicating that ABBY-FineReader was likely the cause of the issue. Sure enough ABBY-FineReader 9.0 was installed with some Epson printer drivers. We uninstalled the ABBY-FineReader software, cleaned the registry of any remains, and then rebooted the system. All of the Microsoft Office 2013 applications worked as expected.
I am often asked about recommending computers to our clients. The issue I find with this is that there are two types of computer buyers: those who ignore it and those that take the advice. Everyone has an opinion but after working with computers for about 30 years I would like to believe that I know something about computers.
Many years ago some of the best computers were assembled from some of the best parts money could buy. There were some great products in the 80's into late 90's but building a computer was one way to get the best of the best and the satisfaction that you did it yourself.
We had a situation where we wanted to setup an Intuit QuickBooks POS system in a locked down configuration so that it was more like a kiosk for the register attendants. There are several ways to go about this but most will lock down every user, but in our case we only wanted to affect the POS users to prevent unnecessary changes to the system.
The process we came up with uses a combination of parental rights, registry hacks, and user menu modifications. You will also need to make sure you create a special local user account that you will assign these changes to. Before attempting this process, make sure you have a backup of your system in the event something doesn't work as expected.
Client's Macbook Pro 8 installed with OS X 10.7.5 Lion would boot up with out any chime, display the user login, but the cursor would just spin without completing the login process.
The client didn't have a backup so our first goal was to get a backup of the drive. That proved a bit of a challenge as it would not mount under any other system prior to v10.7.5. The system booted fine into the Disk Recovery partition, which allowed the disk repair to be run, however it found no issues.
After a recent update on a WatchGuard XTM 5 series we were unable to login using Internet Explorer 10 and the WatchGuard Web UI. The only way to connect to the WatchGuard XTM firewall was to use the WatchGuard System Manager. For us this a bit of a handicap in several ways and we refuse to use Chrome or Firefox since they tend to be less secure.
We finally were able to fix it with a suggestion from WatchGuard support.
Most boot sector viruses detected by some of the best commercial antivirus software such as Symantec's Norton Antivirus, Microsoft's Security Essentials, or Kapersky's Antivirus can not be removed by these applications. And in many cases a boot sector virus is capable of alluding these applications unless the drive is connected to a clean system that has the AV software actively running.
What is a boot sector virus? This is a computer virus that infects a diskette or hard drive in the area which contains information about the configuration of the disk. The boot sector is used by many computer operating systems to determine how to access the diskette or drive. These viruses replace the critical boot sector program used to start the computer with their own malicious program often causing frequent computer crashes, allowing other malware infections, and performance issues.
While working on a client’s Gateway LT2030u netbook running Windows 7, I ran into an issue resolving dns names to IP addresses. The computer had been infected with a number of malware applications, including some Trojans and a large number of adware entries in the registry. But those were all cleaned up.
Despite several attempts to clear out everything, including:
The computer still would not resolve a simple address like www.apple.com. IPCONFIG /ALL indicated that everything was configured correctly but Windows 7 still would not resolve the dns name.
Yes, a standard PING test to a physical IP address worked fine.
Client's HP Pavilion M9400t was reported as having a noisy fan and then would not boot any longer. The power supply was the primary reason for the system not powering but after replacing the power supply the system would continually reboot. Using the F8 key while booting we were able to force the system to stop on the error and not reboot. This allowed the error message STOP 0x0000007B to be displayed. This error most often is reported when there is a hardware issue.
After backing up the hard drive using Norton Ghost, we went through a series of tests by removing hardware. In this case the video card was an add-in so it was removed but the problem still persisted. Next we checked the BIOS settings and noted the default for the SATA drive was set to RAID. We changed this to IDE and rebooted the system. The system booted normally.
Ads by BlockandSurf are typically a sign of severe trouble with your computer. Past releases of this malware could be removed easily by uninstalling the software and sometimes removing some registry settings. However the lastest infection we found on a Windows 8 system was unresolved except by reinstalling the system to the factory default installation.
The Ads by BlockandSurf appear as popup ads in the lower left of the browser, on the left as sidebar ads, and in some cases will appear as a floating web dialog box over the main web page. In all cases there is some indication that the popup is being presented by "Ads by BlockandSurf". One of the signs that this is not the easy to remove version of this infection is that clicking on a link on what appears to be a clean web page results in the destination page appearing with the ads and one or more addition tabs or browser windows that appear attempting to display web sites that have malicious content that attempts to install on your computer.
We often have found with many of the new routers and Windows 7 and later will default to IPv6 for all their Internet lookups when browsing the web. The issue is that seen by many is that the resolution of names in the URL are delayed until an IPv4 is used to complete the lookup. This problem started after an update by Microsoft that caused IPv6 to be preferred over IPv4.
Microsoft released a Knowledge Base article on this issue, KB2533454 - Resolving Internet connectivity issues after World IPv6 Launch (June 6, 2012). This KB article contains a Microsoft FixIt tool to change the preferred IP version from IPv6 back to IPv4
One of the most common questions we get regarding mobile devices is how to setup an Apple iPhone with access to a corporate Microsoft Exchange mail system. This doesn't have to be a local system, it could be a hosted cloud Exchange server as well. Many people often will use a POP connection but this really doesn't allow the mobile device to exploit the full capabilities of the Microsoft Exchange services such as synchronizing contacts and calendars. So, get the full benefit of Microsoft Exchange by using the Exchange mail connector on the mobile device.
There are a couple of pre-configuration steps that you may want to take, especially if you have moved your Exchange service to a different hosting provider.
After reinstalling Windows 7 and then tried to install the network driver for the computer the driver installation application displayed the following error "The procedure entry point AddDLLDirectory could not be located in the dynamic link library KERNEL32.dll." This error occurred because the driver installation was ...
We continually get requests for advice on how to reduce the number of spam e-mail messages and robot calls. In some cases, this is hard to combat but you need to start with these steps.
Each time Fedora would release a new version I would install a fresh install of the latest version. The difficulty was always trying to remember how I setup the previous system so that everything would work. In this case the primary function of the Fedor server was for web site hosting. These are the typical steps I used to create my Linux server based on research from others that have posted their process as well as my own experience in the process.
One additional aspect of this process was to support Joomla installations. You will note specific configuration settings that relate to the operation of Joomla in Linux at the end.
The success of a deployment of new computers in a business environment has allot to do with the process and being consistent with that process. Getting the steps out of order may cause some issue that were not expected nor will you know why one computer works fine and another doesn't.
Below is a list of steps that we often follow for deploying new computers in a business environment that has a Windows domain controller.